Now that you have made the decision to try electronic cigarettes, it is time to buy pre-filled electronic cartridges to refill your cartridge with liquid. This is a great money saving technique, as cigarettes can be very expensive. An electronic cigarette cartridge needs to be refilled by either purchasing E-liquid refills or you can prepare your electronic liquid with the help of e-liquid informational material.
Once learned, it can be a simple task to refill the electronic liquid cartridges; however it is tricky to do at first. Do your research first as there are many electronic cigarettes that are not meant to be refilled. It doesn’t mean that this is impossible or that using an electronic cigarette cartridge is too difficult. Two common types of refilling the electronic cigarettes are the drip method and the injection method.
Things you must have: Dropper & E-Liquid
This manner of filling electronic cigarettes takes practice, patience and time.
Step 1: Open the bottle and remove filling (polyester) from inside the bottle.
Step 2: Use a dropper to drop a couple of drops of the electronic liquid into the bottle.
Step 3: Lightly replace the filling and wait a few moments for the filling to absorb the e-liquid.
Step 4: Add a couple more drops to the filling to make sure it is soaked but not too much that the liquid will collect on top.
Step 5: Close the bottle
Things you must have: Injection/Syringe & E-Liquid
The syringe is best way to refill an e-cigarette cartridge. With the injection method you need only E-liquid and an injector or syringe to refill an electronic cigarette. An electronic cartridge syringe makes it easier to extract liquid from the bottle to prepare to refill your e-cartridge. There are various flavors of e-liquids to meet your tastes and preferences as well.
Follow these easy steps to refill your e-cartridge.
Step 1: Using a small screwdriver or other like device to detach the rubber cap from the edge of the cartridge.
Step 2: Use your injector or syringe to remove the electronic liquid from the electronic cigarette cartridge bottle. Carefully put the syringe needle into the center of the filler until it is close to the bottom of the electronic cigarette cartridge. Withdraw the e-liquid slowly through your syringe needle while you are moving the plunger at the same time. Take caution not to overfill your cartridge.
Step 3: Swap the rubber cap on the cartridge.
Step 4: When the cartridge is completely full, close it tightly and use it to fill the electronic cigarette.
Step 5: Place any available electronic liquid back into the electronic cigarette liquid bottle.
Step 6: Clean your injector using fresh water.
Keep your electronic cartridges clean and in good working order so that your e-cigarettes will taste as fresh as you like them. When you start to smell a burning order, it is time to clean out your electronic cartridges.